Custom metal roofing
Custom metal roofing
custom roofing

Features & Benefits

Standing seam metal roofing systems are suitable for commercial, institutional, and residential applications for buildings both large and small. They are adaptable to both low- and steep-slope designs and offer a wide range of size and finish options. In addition to offering exceptional value and longevity for building owners and occupants, metal roofing is a safe and environmentally-conscious alternative to other roofing materials.

Cost Effective

Although the initial cost of metal roof systems may be higher than shingles, the cost/benefit ratio over the life of the roof is superior to that of a shingle system and far superior to either shake, slate or tiles. Metal roofing systems manufactured to exact length also contribute to a fast and installer-friendly application process, keeping labour costs reasonable and construction project duration shorter.


Metal roofing can be as little as 1/10th the weight of competing roof materials, translating to lower transportation and construction costs.


Metal roofing is beautiful as well as durable and is available in many different styles, configurations, and colors to fit diverse architectural requirements and tastes. Local building codes and design/performance requirements should be reviewed when considering standing seam roofing.

Life Expectancy

A quality metal roof that is properly installed could last the lifetime of the owner. In fact, because metal withstands so many elements, metal roofing is known for its extensive life cycle.

Weather Resistant

Properly installed metal roofing systems will withstand inclement weather (high winds, hail, snow and rain) better than any other roofing material. With proper installation, metal roofing is just as lightning-resistant as other roofing material. Manufactured in our state-of-the-art facility in Edmonton, Alberta, they are perfectly suited to Canadian winters.


Metal roofing is a much better overall investment than traditional roofing materials – it is longer lasting, durable and more weather-resistant (no warping, cracking, or peeling), it does not burn and is impervious to termites and pests. In testing, metal systems have withstood winds up to 200 m.p.h. and have historically survived hurricanes and wind storms when other materials have failed. You can feel safe that you have a reliable roof with our metal roofing systems.


Standing seam metal roofing systems are suitable for new construction or renovation projects with slopes as shallow as ¾/12 pitch*. It is especially cost-effective in re-roofing applications where it can be installed over the existing roofing material, bringing significant savings in time and labor in addition to eliminating the problem of disposal.

*Especially low-slope roofing may require additional weatherproofing or membrane products to meet performance requirements. Consult building code and/or National Roofing Contractors’ Association guide to properly select all system components.

Video Resources

Lenmak – Hip Flashing Installation Animation

Lenmak – Valley Flashing Installation Animation

Lenmak-Gable Installation Animation

Lenmak-Eave Flashing Installation Animation

Lenmak- Vented Ridge Installation Animation

Mechanical Lock Panel Roofing System

Nail Strip Snap Lock Roofing System

Snap Seam Roofing System

  • 26ga, 24ga or 22ga roll-formed panel systems offer a sleek, durable solution to tough Canadian winters.
  • The interlocking seam and concealed fastener system is engineered to prevent leaking and damage caused by ice-damming, a common issue with other roofing systems.
  • Three panel types use different installation techniques to ensure that the best and most economical panel is available.
  • Available in a wide variety of colors and finishes.
  • Produced to approximately 12 or 20 inch coverage (refer to profiles for precise coverage) and custom lengths (coil stock is rolled out and slit in-house to produce custom panel widths and colors when required).

Available Profiles

  • Mechanical Lock

  • 1 x 13¼
  • 1 x 21¼
  • 1½ x 12¼
  • 1½ x 20¼
  • 2 x 11
  • 2 x 19
  • Nail Strip

  • 1 x 11¾
  • 1 x 19¾
  • 1½ x 10⅞
  • 1½ x 18⅞
  • Snap Seam

  • 1 x 12⅞
  • 1 x 20⅞
  • 1½ x 11⅜
  • 1½ x 19⅜

Some limitations on panel length, gauge, and colour may apply. Custom profiles are also available. Please contact us for more information.

Installation Details

Click to Expand

Download Center

Sell Sheet

Colour Chart

Standard Finish Warranty

Premium Finish Warranty

Standard Finish Maintenance

Premium Finish Maintenance

Connect with us on